[ Pobierz całość w formacie PDF ]

ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
BMW X5* 01 ’! DIESEL
’!
MAKE MOD. YEAR
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens on the passenger s side wheelhouse.
POSITION
Install the modular systems and the modules behind the glove box under the dashboard,
CENTRAL POSITION
passenger s side.
POWER SUPPLY + 30: connect to the RED wire located in the wiring harness along the steering column.
- 31: connect to a ground terminal located behind the left lateral bulkhead, driver s side.
IGNITION WIRE +15/54: connect to the wire with the function of ignition wire located in the ignition key.
DIRECTION INDICATORS Connect to the wires: BLUE/GREEN at the position nr.11 (ant.left), BLUE/BROWN at the
position nr.12 (post.right), BLUE/YELLOW at the position nr.14 (lat.left) located in the wiring
harness of the 15 way white connector; BLUE/GREEN at the position nr.8 (post.left),
BLUE/BROWN at the position nr.6 (ant. right), BLUE/YELLOW at the position nr.14 (lat. right)
located in the wiring harness coming out of the 15 way black connector located on the coming
out of the lights module, on the right of the passenger s side glove compartment, behind the
covering.
Refer to the diagram nr.147.
ELECTRIC WINDOWS Negative control signal
The Comfort closing of the windows is obtained timing at 24s. the LIGHT BLUE/RED wire at
the position nr.4.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS Art.3800 Vehicle Position
YELLOW/BLACK BLACK Pos. nr. 6, 20 way black connector.
GREY/BLACK BLUE Pos. nr.14, 20 way black connector.
VIOLET LIGHT BLUE/RED Pos. nr. 4, 12 way black (white) connector.
ORANGE WHITE7BLACK Pos. nr. 3, 12 way black (white)connector.
VIOLET/WHITE ground car body
ORANGE/WHITE positive supply in the fuse box.
The 20 way black connector is located in the central locking unit placed behind the passenger s
side glove compartment. The 12 way black (white) connector is located on the coming out of
the buttons controls inside the driver s side door.
Refer to C diagram in the dedicated installations manual, inside the kit of the antitheft.
IMMOBILISATION POINT Fuel pump
Cut the 1,5 mm2 GREEN/BLACK wire located in the wiring harness coming out of the fuse
marked F14, in the fuse box placed under the passenger s side dashboard.
+50: cut the 3 mm2 BLACK/YELLOW wire located in the wiring harness coming out of the
STARTER
connector of the ignition key.
BONNET SWITCH Install an additional switch on the front headlamp support plate, driver s side.
DOORS AND BOOT Connect to the RED/BLUE wire, at the position nr. 20, located in the wiring harness coming out
of the 20 way black connector on the coming out of the central locking unit placed behind the
SWITCHES
glove compartment, passenger s side.
Attention: as the polarity of the doors is at a positive control signal, it is necessary to invert the
signal by using a supplementary relay.
bmx501gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N°147
Diagram for direction indicators connection for BMW X5
YELLOW YELLOW
15 way
white connector
BLUE/GREEN Pos. nr.11
BLUE/BROWN Pos. nr.12
BLUE/YELLOW Pos. nr.14
BLUE/GREEN Pos. nr. 8
BLUE/BROWN Pos. nr. 6
BLUE/YELLOW Pos. nr.14
15 way
black connector
bmx501gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual. [ Pobierz całość w formacie PDF ]